Precision Engineering Works
Precision Engineering Works
Lower Parel, Mumbai, Maharashtra
GST No. 27AAJFP4379C1Z2
TrustSEAL Verified
Call 0804860625070% Response Rate
SEND EMAIL

Dewatering Sewage Pumps

Our product range includes a wide range of dewatering sewage pump, dewatering submersible pump and dewatering centrifugal pumps.

Dewatering Sewage Pump

Dewatering Sewage Pump
  • Dewatering Sewage Pump
  • Dewatering Sewage Pump
  • Dewatering Sewage Pump
  • Dewatering Sewage Pump
  • Dewatering Sewage Pump
  • Dewatering Sewage Pump
  • Dewatering Sewage Pump
  • Dewatering Sewage Pump
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

BrandPEW (PRECISION ENGINEERING WORKS)
Motor Speed2850
Phase Type3 PHASE
Voltage415V , 230V
Motor PhaseThree Phase
Power SourceElectric
Type of End UseDomestic
Motor Horsepower5 - 27 HP

By keeping the track of advanced market development, we are engaged in manufacturing, exporting and supplying an extensive array of Dewatering Sewage Pump. The offered sewage pump is checked on quality provisions so as to supply a defect free range. This sewage pump has non-self priming with axial suction port, horizontal shaft, and radial discharge port. Customers can avail this sewage pump from us at competitive rates within a given time frame.

Features:

  • Easy to install
  • Fine finish
  • Compact design

Other Details:

  • Dynamically balanced rotating parts ensure vibration free and noise less operation
  • Good quality raw materials & hydraulic design facilitate longer life with high efficiency
  • Designed for extensive voltage fluctuations
  • Excellent quick automatic priming action without foot valve up to 8 mtrs
  • Automatic air release during priming
  • Back pullout design, so easy maintenance without disturbing pipe lines
  • Available in Bare, coupled, Mono block, Belt driven & engine driven version
  • Also offered pump with trolley/ trailer to move it from one place to another
  • Easy inspection of impeller
  • Large diameter solids handled up to 60 mm
  • High resistance to abrasive liquids the wear plate is easily replaced and wear plate & impeller are also available with ceramic coating

Specifications:
Power Range0.75 kw – 18.5 kw (1.0 HP – 60 HP)
Speed50 Hz / 2880 rpm / 1440 rpm
Maximum flow rate80 lps
Maximum total head38 m
Degree of protectionIP 44
Class of insulation"B"
Direction of RotationClockwise Viewed from Driving end
Type of dutyS1 (Continuous)
Maximum suction lift in metres8
Maximum liquid temperature33°C
Maximum ambient temperature40°C
Solid Handling CapacityUp to 40 mm
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: MUMBAI
Yes! I am Interested

Dewatering Submersible Pump

Dewatering Submersible Pump
  • Dewatering Submersible Pump
  • Dewatering Submersible Pump
  • Dewatering Submersible Pump
  • Dewatering Submersible Pump
  • Dewatering Submersible Pump
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Power SourceElectric
Power0.37 to 2.2 kW
BrandPEW( PRECISION ENGINEERING WORKS)
Type of End UseAgricultural
Automation GradeAutomatic
IP RatingIP68

"PEW" Submersible dewatering pumps are vertically mounted, single suction, single stage (non-clog) pumps, designed to operate underwater.The low weight and compact design make them easy to transport.Once delivered to the site they can be used right away.These pumps are available in 3 impellar configurations:-

  • 1. CLOSED
  • 2. CUTTER AND
  • 3. VORTEX
FEATURES
  • Heavy duty bearings
  • High efficiency copper wound motor
  • In-built lip seal to prevent ingress of silt and sand
  • Float switch is provided upto 0.75 kw - 1ph
  • Sewage pump Can handle solids upto 15mm & dewatering pump Can handle solids up to 30 to 60mm
  • The relatively small size and weight make these pumps specially suitable for temporary services like dewatering of construction sites and for emergency services in case of flooding.
  • The pumps at equipped with a handle which makes it easy to move them from one point of application to the other.
  • Pumps are designed for free standing installation, but can also be permanently installed by means of an auto coupling guide rail system
  • Pumps in permanent installations can cope with PH-values ranging from 4 to 10.
  • Permissible Liquid temperature: 0° to 40°C
  • All pumps are supplied with 15 meters cable up 3 HP pumps & 20 meters cable upto 5 to 10 HP pumps
  • The stator windings incorporate temperature sensors (PTC Or TOP) which cut out the motor in case of over temperature. (Temperature sensors (PTC OR TOP) are built into the stator windings, and a contact in the sensors will open on the case of over temperature i.e. 120 oc.)
Details:
Power Range0.37 – 2.2kW (1 Phase) & 0.37 – 7.5kW(3 Phase)
Speed2900 RPM
Degree of protectionIP 68
Motor typeDry
Impeller typeSemi-open, non-clog
Insulation typeClass F
VersionSingle Phase: 230V, 50Hz, A.C. Supply. Three
Phase: 380 - 415V, 50/60Hz, A. C. Supply
Direction of rotationClockwise (when viewed from driving end)
DutyS1 Continuous
MATERIAL OF CONSTRUCTION
Part NameCast Iron FG 200
Pump CasingCast Iron
Motor frameS.S. 304
ImpellerCast Iron / Polyamide / SS 304, 316, 410
ShaftS.S. 420
Mechanical sealDual Mechanical Seal Silicon Carbide and Carbon Ceramic
APPLICATIONS
  • Removal/ Transfer of
  • Stormwater
  • Raw sewage
  • Wastewater
  • Industrial effluents
  • Accretionary waste
Request
Callback
Yes! I am Interested

Dewatering Centrifugal Pumps

Dewatering Centrifugal Pumps
  • Dewatering Centrifugal Pumps
  • Dewatering Centrifugal Pumps
  • Dewatering Centrifugal Pumps
  • Dewatering Centrifugal Pumps
  • Dewatering Centrifugal Pumps
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Motor Horsepower0.5 to 10
BrandPEW (PRECISION ENGINEERING WORKS)
Power SourceElectric
Material of ConstructionCast Iron
ColorBLUE
Warranty RequiredYes
Installation and After Sales ServiceNo

"PEW" "MP & NSP Series" Self-priming Non-Clog Monoblock Pump''s volute chamber and impellers are designed to give the best possible hydraulic efficiency and suction lift characteristics. These pumps are powered by a totally enclosed fan cooled A.C. Induction motor. Motor stator is made of low watt-loss silicon steel laminations assembled under pressure and rigidly locked in the frame. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the pumps.

FEATURES
  • Dynamically balanced rotating parts ensure vibration free and noise less operation
  • Good quality raw materials & hydraulic design facilitate longer life with high efficiency
  • Designed for extensive voltage fluctuations
  • Excellent quick automatic priming action without foot valve upto 8 mtrs.
  • Automatic air release during priming.
  • Back pullout design, so easy maintenance without disturbing pipe lines.
  • Available in Bare, coupled, Monoblock, Belt driven & engine driven version.
  • Also offered pump with trolley/ trailer to move it from one place to another.
  • Easy inspection of impeller.
  • Large diameter solids handled upto 60mm.
  • High resistance to abrasive liquids the wear plate is easily replaced and wear plate & impeller are also available with ceramic coating.
SPECIFICATIONS
Power Range0.75kw – 18.5kW (1.0HP – 60HP)
Speed50Hz / 2880 rpm / 1440 rpm
Maximum flow rate80 lps
Maximum total head38 m
Degree of protectionIP 44
Class of insulation"B"
Direction of RotationClockwise Viewed from Driving end
Type of dutyS1 (Continuous)
Maximum suction lift in metres8
Maximum liquid temperature33
Maximum ambient temperature40
Solid Handling CapacityUp to 40mm
MATERIAL OF CONSTRUCTION
Part NameMaterial
Pump casingCast Iron FG 260 / S.S 304, S.S 316 Bronze
ImpellerCast Iron FG 260 / S.S 304, S.S 316 Bronze
ShaftEn 8/ S.S 410, 304, 316
SleeveS.S 410/ S.S 304, 316
SealingGraphite Asbestos Packing Rope.
Optional – Mechanical Seal
(Carbon & Ceramic)
APPLICATIONS
  • Sewage and Effluent Treatment Plants.
  • Processes with low NPSH
  • For pumping sewage, muddy water polluted liquids or liquids with suspended solids.
  • Dewatering basements, construction sites and trenches
  • As bilge and for washing decks aboard ships
  • Transfer of pumping out petroleum products, chemicals, settled sludge, corrosive fluids, etc,.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
X

Product Videos

Watch More Videos

Explore More Products

View All Products




Reach Us
Dhruv Patel (CEO)
Precision Engineering Works
51, A To Z Industrial Estate, G. K. Marg
Lower Parel, Mumbai - 400013, Maharashtra, India


Call Us


Send E-mail