Precision Engineering Works
Mumbai, Maharashtra
GST No. 27AAJFP4379C1Z2
TrustSEAL Verified
Call 08048606250 84% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Motor Horsepower | 3 HP |
| Stages | Single Stage |
| Motor Phase | Three Phase |
| Brand | PEW |
| Type of end use | Firefighting |
| Power Source | Electric |
| Material of Construction | Cast Iron |
| Warranty | 12 months |
| Cooling Method | Air Cooled |
| Warranty Required | Yes |
| Installation & After Sales Service | No |
PEW" End Suction Pumps are non- self-priming single-stage, centrifugal volute pumps with axial suction port, centrally placed radial discharge port and horizontal shaft. Volute chamber and impellers are designed to give the best possible hydraulic efficiency and good suction lift characteristics. Most modern and highly sophisticated machinery and technology are engaged in manufacturing these pumpsets, using quality raw materials, dynamically balanced impellers and rotors to ensure long life.
These pumpsets are powered by a totally enclosed, fan cooled, AC Induction, two pole motor suitable for continuous duty with main dimensions complying with IEC standards. Motor stator is made of low watt-loss, silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enamelled copper wire and are varnish impregnated. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the pumps.
FEATURES| Power Range | 0.37 kW - 11 kW (3HP-15 HP) 0.37 kW - 7.5 kW (3HP-10 HP) – MS Series |
|---|---|
| Speed | 2880 RPM |
| Versions | Three Phase: 350 - 415V, 50Hz, A.C. Supply Single Phase: 180 – 220V, 50Hz, A.C. Supply |
| Degree of protection | IP 44 |
| Class of Insulation | A, E, & B |
| Direction of rotation | Clockwise viewed from Driving end |
| Type of Duty | S1 (Continuous) |
| Nominal Suction x Delivery size in mm | 32 x 25, 40 x 40, 50 x 40, 50 x 50, 65 x 50, 65 x 65, 80 x 65, 80 x 80. |
| Part Name | Material |
|---|---|
| Pump Casing | Cast Iron |
| Motor Frame | Cast Iron |
| Impeller | Cast Iron / Bronze |
| Shaft | Mild Steel |
| Sealing | Gland Rope |
| Motor Frame | Cast Iron |
| Power Input Range | 0.37 to 7.5 kW |
|---|---|
| Speed | 2900 RPM |
| Degree of protection | IP 55 |
| Insulation | Class F |
| Versions | Single Phase: 230V, 50Hz, A.C. Supply Incorporated with Thermal over load protector. Three Phase: 380-415 V, 50 Hz, A.C. Supply |
| Sealing | Mechanical Seal |
| Direction of rotation | Clockwise viewed from driving end |
| Type of duty | S1 (continuous) |
| Nominal Suction x Delivery size in mm | 25 x 25, 32 x 32,40 x 40, 65 x 65 |
Additional Information: