Submersible Pumps

Product Details:

We are the leading and prominent Manufacturer and Exporter of Submersible Open Well Pump.

Product Details:

We are leading manufacturer, wholesaler and supplier of premium quality Borewell Submersible Pump for House. Specifications to suit the requirements of the clients

Features:

• Robust design
• Long lasting
• Low maintenance

 

Principle of Operation:

• Borewell Submersible Pump are vertical, multistage, centrifugal pumps with motor at the bottom & pump at the top. The water enters at the bottom of the pump and flows upwards through many stages. The stainless steve bronze impellers rotate inside the diffusers with inherent guide vanes. The diffusers direct water leaving each impeller towards suction opening of the next impeller. Such a flow through each stage of impeller and diffuser combination adds pressure at each stage and finally water under high pressure is discharged through outlet at the top

Construction Details:

• Motors are wet-type, water lubricated, water cooled. rewindable. squirrel cage induction, asynchronous type capable of withstanding wide voltage fluctuations. Specially designed tilting pad thrust bearings can withstand axial thrust loads with negligible wear. The stator is wound with water proof synthetic film insulated winding wires. Spring loaded seal rings. grommets 8 sand guard prevent ingress of water in to the motor. An elastic diaphragm compensates for variations in pressure of cooling water as it gets heated during operation

Other Details:

• Upper Housing, Lower Housing, Adaptor, Motor Base, suction and NRV are made of C.I. FG-220 /FG-250 Grade
• 100% pure EC Grade copper used for winding wire which is dual coated with insulation Class B
• High thickness LTB-4 Bushes and Extremely hard wearing Water lubricated thrust carbon bearing with heavy Tilting Pad of Stainless Steel AISI-420 S.S. grade ensures zero working maintenance
• SAND PROOF: design of mechanical seal rings and Sand Guard protection
• FG 250 Grade Investment casting non-magnetic pump bowls
• AISI 410 S.S. Grade pump impellers are a standard feature for all mixed flow and radial flow pump sets
• AISI 410 S.S. Sleeves are reinforced with chromium for proven wear resistant performance
• Special LTB -4 and Nitrile Rubber Bush for proven anti-wear resistance
• Pure AISI 410 S.S Grade Pump Shaft
• Max. permissible sand in water: 50 g/m³
• Dynamically balanced rotating parts
• Silver brazed rotor in all varieties

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Delivery Time: 2-3 WEEKS

Product Details:

The V7 Submersible Pump is a specialized pump designed for pumping water from deep wells, borewells, and underground water sources. It is commonly used in agricultural, industrial, and domestic applications due to its ability to handle high water demands with efficient performance. The "V7" designation typically refers to its suitability for wells with a diameter of 7 inches or more. Submersible pumps like the V7 are fully submerged in water, ensuring efficient operation with minimal noise and vibration.

Product Details:

A Vertical Openwell Submersible Pump is a type of pump that operates submerged in water and is specifically designed for open wells, tanks, and reservoirs. These pumps are installed vertically with the motor and pump submerged, ensuring optimal cooling and noiseless operation. They are widely used for agricultural, industrial, and domestic applications due to their robust design and efficiency in handling water transfer tasks.

Product Details:

"PEW" Submersible dewatering pumps are vertically mounted, single suction, single stage (non-clog) pumps, designed to operate underwater.The low weight and compact design make them easy to transport.Once delivered to the site they can be used right away.These pumps are available in 3 impellar configurations:-

• 1. CLOSED
• 2. CUTTER AND
• 3. VORTEX

FEATURES

• Heavy duty bearings
• High efficiency copper wound motor
• In-built lip seal to prevent ingress of silt and sand
• Float switch is provided upto 0.75 kw - 1ph
• Sewage pump Can handle solids upto 15mm & dewatering pump Can handle solids up to 30 to 60mm
• The relatively small size and weight make these pumps specially suitable for temporary services like dewatering of construction sites and for emergency services in case of flooding.
• The pumps at equipped with a handle which makes it easy to move them from one point of application to the other.
• Pumps are designed for free standing installation, but can also be permanently installed by means of an auto coupling guide rail system
• Pumps in permanent installations can cope with PH-values ranging from 4 to 10.
• Permissible Liquid temperature: 0° to 40°C
• All pumps are supplied with 15 meters cable up 3 HP pumps & 20 meters cable upto 5 to 10 HP pumps
• The stator windings incorporate temperature sensors (PTC Or TOP) which cut out the motor in case of over temperature. (Temperature sensors (PTC OR TOP) are built into the stator windings, and a contact in the sensors will open on the case of over temperature i.e. 120 oc.)

Details: MATERIAL OF CONSTRUCTION APPLICATIONS

• Removal/ Transfer of
• Stormwater
• Raw sewage
• Wastewater
• Industrial effluents
• Accretionary waste