Water Pump

Product Details:

An Open Well Pump is a type of centrifugal pump specifically designed for lifting water from open wells, reservoirs, ponds, or other water bodies where the pump is typically positioned above the water level. These pumps are commonly used in agricultural, industrial, and domestic applications for water supply, irrigation, and draining. Open well pumps are ideal for shallow wells or other sources of water with moderate depths, and they are available in both submersible and non-submersible designs.

Product Details:

High Discharge pumps are self-priming & acting on regenerative principle. The periphery of the impeller has many blades for adding energy to the fluid being pumped. As the fluid flows from the inlet to outlet the fluid pressure increases progressively ensuring a non - pulsating high discharge & high-pressure fluid flow. These pumps are designed for continuous operation handling only clear liquid, free from any suspended particles.

FEATURES

• High Head & High Discharge.
• Stainless Steel Shaft (AISI 410)
• Mechanical Seal.
• No coupling required.
• Continuous heavy duty externally ventilated induction motor.
• Shielded ball bearings are lubricated for life.
• Quiet & maintenance free running.

Details:

• Max. Head – 90m
• Max. Discharge – 620 LPM
• Max. Power rating – 10hp (Single & Double stage)
• Pipe size – 38, 50, 65 mm
• Supply type – Single phase up to 2hp; Three-phase up to 10hp

MATERIAL OF CONSTRUCTION APPLICATIONS

• High rise buildings.
• Industrial & Residential use.
• Transfer purpose.
• Boosting line pressure.
• Refrigeration.
• Fire Fighting.
• Distribution & Pressure systems.
• Boiler Feed.
• Various marine applications.

Product Details:

The periphery of the impeller has many blades for adding energy to the fluid being pumped. As the fluid flows from the inlet to outlet the fluid pressure increases progressively ensuring a non - pulsating high discharge & high-pressure fluid flow. These pumps are designed for continuous operation handling only clear liquid, free from any suspended particles.

FEATURES

• High Head & High Discharge.
• Stainless Steel Shaft (AISI 410)
• Mechanical Seal.
• No coupling required.
• Continuous heavy duty externally ventilated induction motor.
• Shielded ball bearings are lubricated for life.
• Quiet & maintenance free running.

Details:

• Max. Head – 90m
• Max. Discharge – 620 LPM
• Max. Power rating – 10hp (Single & Double stage)
• Pipe size – 38, 50, 65 mm
• Supply type – Single phase up to 2hp; Three-phase up to 10hp

MATERIAL OF CONSTRUCTION APPLICATIONS

• High rise buildings.
• Industrial & Residential use.
• Transfer purpose.
• Boosting line pressure.
• Refrigeration.
• Fire Fighting.
• Distribution & Pressure systems.
• Boiler Feed.
• Various marine applications.

Product Details:

Crompton Water Pumps are high-performance, reliable pumps designed to meet various water lifting and transfer needs across domestic, agricultural, and industrial applications. Manufactured by Crompton Greaves, one of India’s leading electrical equipment manufacturers, Crompton water pumps are known for their durability, energy efficiency, and versatility. They offer a wide range of pumps suited for applications ranging from household water supply to large-scale irrigation systems.

Product Details:

The Kirloskar Self-Priming Pump is a highly efficient and reliable pump designed for various water transfer applications. Self-priming pumps are capable of creating a vacuum within their casing to lift and transfer water from below the pump level, eliminating the need for manual priming under normal operating conditions. Kirloskar, a renowned name in the pump industry, offers robust and durable self-priming pumps suitable for domestic, agricultural, and industrial uses.

Product Details:

Kirloskar Water Pumps are reliable, durable, and high-performance pumps manufactured by Kirloskar Brothers Limited (KBL), one of India's leading pump manufacturers. Kirloskar water pumps are designed to meet the needs of various industries, agriculture, and domestic applications. They offer a wide range of pumps, including centrifugal, submersible, monoblock, and multistage pumps, among others, catering to a broad spectrum of water-lifting requirements.

Product Details:

 The purpose of a jockey pump is to maintain pressure in a fire protection piping system so the larger fire pump does not need to run to compensate for minor leaks in the water circuit. A jockey pump package consists of a pump, motor and controller. 
. The jockey pump should be capable of generating the same pressure as the fire pump generates at no flow. It is best to avoid a jockey pump that can generate much more than that because it could be flirting with the possibility of exceeding the rated system pressure. Jockey pumps play a very important part in the trouble-free operation of a fire protection system. If care is taken in the selection, installation and maintenance of the equipment, it should last for many years.

Product Details:

The 2HP and 3HP water pump motors are powerful and reliable devices designed for a range of water pumping applications. They are commonly used in agriculture, industrial setups, commercial buildings, and residential areas where moderate to high water flow and pressure are required. These motors provide higher capacity compared to 1HP motors and are suitable for tasks requiring robust water movement over long distances or to elevated heights.

Product Details:

The Booster  Pump is a highly efficient and reliable pump designed for various water transfer applications. Self-priming pumps are capable of creating a vacuum within their casing to lift and transfer water from below the pump level, eliminating the need for manual priming under normal operating conditions. Kirloskar, a renowned name in the pump industry, offers robust and durable self-priming pumps suitable for domestic, agricultural, and industrial uses.

Product Details:

We are leading manufacturer, wholesaler and supplier of premium quality  Self Primping Monoset Pump. Specifications to suit the requirements of the clients

Product Details:

The periphery of the impeller has many blades for adding energy to the fluid being pumped. As the fluid flows from the inlet to outlet the fluid pressure increases progressively ensuring a non - pulsating high discharge & high-pressure fluid flow. These pumps are designed for continuous operation handling only clear liquid, free from any suspended particles.

FEATURES

• High Head & High Discharge.
• Stainless Steel Shaft (AISI 410)
• Mechanical Seal.
• No coupling required.
• Continuous heavy duty externally ventilated induction motor.
• Shielded ball bearings are lubricated for life.
• Quiet & maintenance free running.

Details:

• Max. Head – 90m
• Max. Discharge – 620 LPM
• Max. Power rating – 10hp (Single & Double stage)
• Pipe size – 38, 50, 65 mm
• Supply type – Single phase up to 2hp; Three-phase up to 10hp

MATERIAL OF CONSTRUCTION APPLICATIONS

• High rise buildings.
• Industrial & Residential use.
• Transfer purpose.
• Boosting line pressure.
• Refrigeration.
• Fire Fighting.
• Distribution & Pressure systems.
• Boiler Feed.
• Various marine applications.